|
|
|
|
|
|
DECK-THANE™ PRIMER (Elasto-Deck™ Systems)
|
  
|
Parking Deck System with Metal Grit Non-Skid Finish in 42 colors for waterproofing parking decks, roofs, and stadiums.
For Full Documentation On This Item See Our General Product Index
|
Available Colors:
|
A one component, moisture cured, polyurethane based primer for concrete and wood surfaces, used to promote adhesion of our polyurethane deck coating systems and joint sealants to concrete and wood.
SURFACE PREPARATION:
All surfaces which are to be coated must be free of contamination such as curing compounds, concrete hardeners, bond breakers, paint, etc. We recommend water-curing concrete instead of using concrete curing compounds. All surfaces must be clean,sound and dry. A light broom-finish is recommended for concrete surfaces. Sandblasting is recommended when possible, otherwise acid etching and wirebrushing may be sufficient. All solvents must be allowed to evaporate off before application over DECK-THANE™ PRIMER.
All surfaces, where necessary, must be primed with DECK-THANE™ PRIMER (or the primer specified in the product's documentation) prior to application of the coating system.
For best results, the surface that has been coated with DECK-THANE™ PRIMER should be allowed to cure for a minimum of 2 hours before the application of the polyurethane membrane or joint sealant. If for some reason the primer is allowed to cure in excess of 8 hours, the surface should be sanded and reprimed with DECK-THANE™ PRIMER. DECK-THANE™ PRIMER should not be applied over wet surfaces as full adhesion and penetration will not be obtained. Recommended coverage is approximately 250 sq.ft. per gallon on rough surfaces to 350 sq.ft. per gallon on smooth surfaces.
|
|
|
|
