This non-fading color coating is a melding of nature and technology that maintains its color in the most demanding environments.
TECH DATA SHEET | PRODUCT BULLETIN

The rich color and lasting beauty of 3M™ Colorquartz™ Crystals enliven floors, walls, swimming pool surfaces, counters, and other surfaces. These crystals allow timeless designs to take shape. Whether an architectural installation calls for warm or cool colors, you can choose from unlimited blend combinations and patterns or create your own custom blend.

ADVANTAGES:

• Unlimited blend combinations and patterns and custom blends
• Lasting color, beauty, durability under harsh chemicals and UV
• Seamless, low-maintenance
• No dirt or mildew build-up
• Control slip resistance/textures
• Mix easily due to consistent grade, easy flow, matching color
• Variety of substrates, including wood, concrete, and plastics

APPLICATIONS:

• Indoor or outdoor applications
• Schools, airports, hospitals, malls, sports facilities, processing plants
• Garages and basements
• No fade color for pools and spas
• Countertops, walls, decks, roofs, and concrete
• May be used in combination with a resin system
• Add colorful finishes to polyurea and epoxy floors

COLORS AVAILABLE:

3M and Colorquartz are registered trademarks of 3M.

Natural aggregate in three mesh grades for broadcasting into wet coatings to create anti-skid and anti-slip surfaces - available in #0 (Fine), #1 (Medium), and #2 (Coarse) grades, in 100 lb bags.
TECH DATA SHEET | PRODUCT BULLETIN

Monterey Sand is available for all coating systems where an anti-skid surface is required. May be used with epoxies, polyurethanes, and sloping materials to create a long lasting, wear resistant finish for decks, industrial and warehouse floors, parking structures, ramps, steps, etc.

ADVANTAGES:

• Long lasting, wear resistant, and durable in all climates
• Slip resistance for pedestrians
• Improves the compressive strength of coatings to resist the effects of suddenly applied braking, turning, and acceleration
• Extends the yield of coatings while maintaining their elastomeric properties
• Natural material / long shelf life

APPLICATIONS:

• Vehicular traffic
• Roof decks
• Plaza decks
• Parking structures and lots
• Pedestrian walkways
• Athletic surfaces
• Tunnels and slopes
• Industrial and warehouse floors

A lightweight, tough, fanfolded, extruded polystyrene that goes up fast and provides durable protection for membranes.
TECH DATA SHEET | PRODUCT BULLETIN

GreenGuard PB4 features high resistance to moisture absorption and has excellent thermal performance. That makes it an excellent choice for use in the wall cavity behind the brick exterior. It is one of the toughest, most economical, and weather resistant layers of protection you can put between the earth and your building's waterproofing membrane.

ADVANTAGES:

• Reliable protection for waterproofing membranes
• 6.4mm thick fanfolded bundles that quickly unfold to two full squares or 18.59 m2
  
• Tough plastic capsheets that resist puncturing
• High compressive strength and impact resistance
• Withstands even the toughest load pressures
• Simple installation
• Significant time and labor cost savings compared with conventional protection board
• Lightweight, easy to transport, handle, trim and apply
• Long-lasting thermal performance in all below-grade conditions
• Complies with all relevant building codes

APPLICATIONS:

• Use GreenGuard PB4 after applying the waterproofing membrane to exterior foundation walls to prevent damage when backfilling
• High compressive strength and impact resistance withstands tough load pressures and backfilling impact
• Superior resistance to moisture absorption and decomposition from long-term exposure to chemicals in the soil

Available as 6.4mm x 1.219m x 15.24m (1/4" thick, 4' x 50') fanfolded product, GreenGuard PB4 Waterproofing Protection Board is lightweight, easy to transport, and easy to install. Since it is Extruded Polystyrene, its dense closed-cell construction provides superior resistance to moisture absorption and decomposition from long-term exposure to chemicals in the soil.

The tacky surface of the partially cured liquid membrane, or a brief torching of the surface of sheet membrane, or any polystyrene-compatible adhesive - will hold GreenGuard PB4 in place during back-filling operations. A Stanley knife is all that is needed to cut and fit GreenGuard PB4 on the job. The packs can even be cut with a power saw, so no special tools are required.

A thermally set, spunbonded polyester non-woven fabric made up of 100% continuous polyester filament.
TECH DATA SHEET | PRODUCT BULLETIN

The polyester filament fibers in Perma-Glas MESH are randomly arranged and reinforced with a 5 x 5 polyester scrim for added strength and stability. It has high tensile and tear strength and wets out well with both cold applied cutbacks and emulsions. Perma-Glas MESH is resistant to sunlight and possesses good elongation and recovery properties.

ADVANTAGES:

• 100% continuous polyester filament fibers randomly arranged
• Reinforced with 5 x 5 polyester scrim for strength and stability
• High tensile and tear strength
• Wets out well with cold applied cutbacks and emulsions
• Non-raveling, moisture, rot and mildew resistant, lightweight
• Resists sunlight
• Good elongation and recovery

APPLICATIONS:

• Oxidized asphalt and cold tar bitumen for hot mop system
• Repair fabric for new and old construction
• Roofing and waterproofing
• Foundations and slabs
• Tunnels and subways
• Pipeline joint wrap
• Parapet wall treatment
• Tennis courts
• Plaza decks

Recycled polypropylene high-flow drain mat: a new generation of environmentally conscious drain products made from post-industrial recycled material.
TECH DATA SHEET | PRODUCT BULLETIN

This drainage composite consists of a core of fused, entangled filaments molded into a flexible square waffle pattern with a geocomposite fabric bonded to one side. It can help contribute up to 2 LEED™ points when used in conjunction with other recycled content products and can contribute towards additional LEED™ points when used on a “greenroof”.

ADVANTAGES:

• Excellent durability
• Protects waterproofing during and after backfill
• Conforms to irregular surfaces and corners
• Waffle design creates open flow path - even during backfill
• Continuous flow under any load
• Long rolls cut installation costs
• 40% Recycled = LEED™ points
• Increased flow rates

APPLICATIONS:

• Foundation walls
• Green roofs
• Plaza decks
• Retaining walls
• Beneath slabs
• Earth sheltered homes
• Underground parking
• Exterior planters

Single component, servicable Cox Avon caulking gun with fully replaceable parts for low to high viscosity caulk and sealants.
PRODUCT BULLETIN

• Pre-Configured for Sausage Application
• Plunger Included for Cartridge Application
• Mechanical Advantage 12:1
• Switchable Flow-Stop Control
• Wear Compensating Device
• Drawn Aluminum Barrel
• Quick Release End Cap

DISPENSING:
Always use full trigger pulls. To stop any product flow on, depress the release plate when dispensing is finished.

MAINTENANCE:
To ensure good performance, the fulcrum pins in the handle should be lubricated with WD40 (or equivalent) after every 10 cartridges. Always wipe off any adhesive using the manufactures recommended solvent before it has time to cure. Check the barrel screw, plungers, all external bolts and screws to assure they are tight. Tighten if found loose.

Recycled polypropylene high-flow drain mat: a new generation of environmentally conscious drain products made from post-industrial recycled material.
TECH DATA SHEET | PRODUCT BULLETIN

This drainage composite consists of a core of fused, entangled filaments molded into a flexible square waffle pattern with a geocomposite fabric bonded to one side. It can help contribute up to 2 LEED™ points when used in conjunction with other recycled content products and can contribute towards additional LEED™ points when used on a “greenroof”.

ADVANTAGES:

• Excellent durability
• Protects waterproofing during and after backfill
• Conforms to irregular surfaces and corners
• Waffle design creates open flow path - even during backfill
• Continuous flow under any load
• Long rolls cut installation costs
• 40% Recycled = LEED™ points
• Increased flow rates

APPLICATIONS:

• Foundation walls
• Green roofs
• Plaza decks
• Retaining walls
• Beneath slabs
• Earth sheltered homes
• Underground parking
• Exterior planters

Cox serviceable caulking gun with fully replaceable parts for dual component caulk and sealants with a wide range of viscosities.
PRODUCT BULLETIN

• Mix Ratios: 1:1; 2:1; & 4:1
• Mechanical Advantage 18:1
• Support Discs - Secure and Accurate Cartridge Fit
• Wear Compensating Device
• Patented Catch Plate (Sintered Steel)
• Low-High Viscosity Materials

CARTRIDGE LOADING:
Depress the release plate and fully retract the rods. Fit back of cartridge on black plastic locating discs and push firmly. Locate the front end of the cartridge in the gun.

DISPENSING:
Always use full trigger pulls. To stop any product flow on, depress the release plate when dispensing is finished.

MAINTENANCE:
To ensure good performance, the fulcrum pins in the handle should be lubricated with WD40 (or equivalent) after every 10 cartridges. Always wipe off any adhesive using the manufactures recommended solvent before it has time to cure.

DO NOT:

• immerse the gun in solvent.
• operate the gun with loose, broken or missing parts.
• use damaged cartridges or the wrong type of cartridge in the applicator.

Jiffymixer is a true mixer, not a stirrer; with 2 vertical and 2 horizontal blades confined in a protective ring.
TECH DATA SHEET | PRODUCT BULLETIN

The Jiffy Mixer’s two vertical blades confine the mixing action within the mixing head while the horizontal opposed blades force material from the upper and lower areas of the container inside the head. The leading edge of the lower horizontal blade scrapes the bottom of the container to bring all settled particles into the head. The ring prevents damage to the blades and prevents puncturing of container walls.

BLADE TYPES: (click to view each style) LM | HS | ES | PS | HD

POWER TOOL SPECIFICATIONS:
Jiffymixers fit all 1/4” - 3/4” Power Tools. They operate with both electric and air-driven chucked power tools. Tools with 450-750 RPM give the best rate of thorough mixing. Permanent installation can be easily accomplished.

APPLICATIONS:

• Adhesives, glues
• Cement, mortar
• Coatings, paint, epoxies
• Foods, foams
• Hi-viscosity liquids
• Pharmaceuticals, chemicals
• Ceramics
• Polyester gelcoats, resins
• Sheetrock mud, slurry
• Zinc-rich materials
• Any other “tough to mix” material

ADVANTAGES:

• Cuts mixing time up to 90%
• Won't splash
• Won't suck air
• Unconditionally guaranteed
• Stainless Steel 304
• The lower horizontal blade scrapes bottom to bring all particles into the head.
• The ring prevents damage to blades and prevents puncturing of containers.

TECH DATA SHEET | PRODUCT BULLETIN

Constructed of durable “NITRILE” rubber, these SQUEEGEE blades will outperform EPDM and SBR type products. With high tensile strength (l,800 psi) and a shore (A) hardness of +60, they deflect less under stress and assure more accurate placement of coatings at their specified mil thickness. Holes are pre-drilled to allow quick assembly with FA-1294 frames.

APPLICATIONS:

• Deck coatings
• Membranes
• Epoxy coatings
• Roof coatings
• Adhesives, glues
• Hi-viscosity liquids and chemicals
• Polyester gelcoats, resins
• Sheetrock mud, slurry
• Zinc-rich materials

ADVANTAGES:

• Easy to assemble
• Blades predrilled to mate with three piece frame assembly
• Fasteners included with frames
• Durable “NITRILE” rubber outperforms EPDM and SBR
• High tensile strength and shore hardness
• Less deflection under stress
• Assures more accurate placement of thin mil coatings